Skip to main content

Whats way Walk Energy in Future?




President Obama told listeners during his weekly address that American energy is booming under his Administration. The reality is, however, that the private sector delivered the economic benefits America is enjoying from energy production—and the Administration’s policies are stunting that growth.


The President highlighted that domestic oil production surpassed imports for the first time since 1995; that we’re producing more energy from wind, solar, and other renewables; and that government efficiency programs are putting people to work and saving American families money. But much of the growth we’ve seen in oil and natural gas production as a result of horizontal drilling and hydraulic fracturing are occurring on private lands—out of the Administration’s excessive and onerous regulatory reach.


The Bakken, Marcellus, Niobrara, Eagle Ford, Permian, and Haynesville shale formations, which lie primarily on private and state-owned lands, accounted for 90 percent of domestic oil production growth during 2011 and 2012 and almost all of the natural gas production growth. Increased supplies have lowered energy bills and created employment opportunities all over the country.


President Obama’s policies and policy proposals, on the other hand, are going to result in wasted taxpayer dollars and artificially higher energy prices. His wish for a cap-and-trade program, which died in the Senate, would have increased electricity prices 90 percent and gasoline prices by $1.38 per gallon by 2035. As an alternative, the Administration is moving forward with a regulatory scheme that will kill coal and make prices, as he promised under his cap-and-trade plan, “necessarily skyrocket.”


The Administration has failed to open federally controlled lands and waters to drilling. Oil and natural gas production has slowed on federal lands and could only get worse. The Department of Interior proposed regulations of hydraulic fracturing that would further slow production on federal lands.


Representative Bill Flores (R–TX) introduced legislation (H.R. 2728) that would maintain the responsive state regulatory process that has been successful and provided the necessary structure to produce energy, create jobs and economic growth, and protect the environment. And if President Obama had approved the permit for construction of the Keystone XL Pipeline in a timely manner, up to 830,000 barrels of oil per day would already be coming from Canada to the Gulf Coast refineries.


What else has the government done for us? How about waste billions of dollars subsidizing politically preferred energy sources. Taxpayer-funded handouts promote economic inefficiency, create technological stagnation, promote special-interest politicking, and take opportunities away from economically viable projects that would actually help to grow the economy. Efficiency subsidies and mandates restrict choice, drive up sticker prices, and do much more to hurt American families than to help them. If any of these technologies or industries has value in the marketplace, it will succeed without a specific government policy intended to boost its use.


Americans should be happy we’re experiencing an economic boon as a result of domestic energy production, but President Obama’s weekly address serves as another reminder that markets drive growth and efficiency and that the Administration’s regulations, subsidies, and mandates do the opposite.

Source: http://blog.heritage.org/2013/11/18/energy-what-works-and-what-doesnt/


What is Sheet cutting shearing machine, Combining shearing machine and Sheet bending machine?


Comments

Popular posts from this blog

Maintenance Schedule for Clarke Fire Pump Engine

Maintenance Schedule for Clarke Fire Pump Engine Clarke Fire Pump Engine Daily Maintenance: ·          Battery check ·          Lube oil check ·          Radiator water check ·          Cleanliness ·          Fuel Check Clarke Fire Pump Engine Weekly Maintenance: ·          Air cleaner check ·          Battery check ·          Belts check ·          Coolant Hoses check ·          Coolant leaks check ·          Coolant levels and conditions check ·          Coolin...

Packing, Seals and Gaskets

Packing, seal and gasket resists the flow of fluid from machinery face, head, joint and machinery gap or clearance. Packing materials: Fiber, asbestos, cotton, synthetic materials, plastic, Teflon, graphite etc. Packing structure: Twisted, Braided and Consolidated. Gasket:             A gasket is a mechanical seal that fills the space between two mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Gaskets allow " less-than-perfect " mating surfaces on machine parts where they can fill irregularities. Gaskets are commonly produced by cutting from sheet materials, such as gasket paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, or a plastic polymer (such as polychlorotrifluoroethylene)                        ...

Therbligs and Basic 17 motion name of therblig

Therbligs : A graphical representation of the co-ordinated activities of an operators body members. These activities ar described in terms of basic or fundamental motions known as therbligs.                                         At the time Frank Gilbreth was doing his work in the field of motion study, he also concluded that any manual activity could be described in terms of 17 fundamental motions. This comparable to our being able to describe every word in the English language in terms of some of the 26 letters of the alphabet. Each of these fundamental motions is called a Therblig. Basic 17 motion name of Therblig : Name of Therblig Letter abbreviation Search Select Grasp Transport empty Transport loaded ...

How to Calculate Heat Rate of Generator Engine?

Types of Power Plant (Technology) Natural Gas Based power plant technology Diesel power plant technology Heat Rate of Engine= Fuel Flow or Fuel burned * Fuel Heating Value / Power Output 1 Liter Diesel = 0.85 Kg Example: Heat Rate of Diesel Generator at 100% Load Engine Model- 2506A-E15TAG2 Engine Capacity=400 eKW Fuel Consumption=84 L = 71.4 Kg Electrical Energy Output = 400 KW Heating Value of Diesel = 42.5 MJ/Kg Heat Rate of Engine= Fuel Flow or Fuel burned * Fuel Heating Value / Power          Output Heat Rate of Engine = 71.4 Kg * 42.5 MJ/Kg /400KW   Heat Rate of Engine =7.58 MJ/KWH Heat Rate of Gas Generator at 100% Load Engine Model- VHP5904LTD Engine Capacity= 900 eKW Fuel Consumption= 271 Nm 3 Electrical Energy Output= 900 KW Fuel Consumption= 0.28 Nm3/KWH Heating Value of Natural Gas= 35.22 MJ/ Nm 3 Heat Rate of Engine= Fuel Flow or Fuel burned * Fue...

what is the difference between long shunt and short shunt dc generator?

How do they differ from normal generator?    Draw their V-I characteristics and explain them? In short shunt connection the shunt field is connected directly across the armature terminals and the armature connection equals the sum of the shunt field current plus the load current . In this instance the load current flow s through the series field winding so that the load current and series field current are one and same.              In long shunt connection the voltage across the shunt field is the same as the terminal voltage of the generator and current in the armature will be the current in the series field. The armature current equals the shunt field current plus the load current.   A shunt generator has the field circuit connected directly across the armature. As more devices connected in parallel the load on the generator increases that the generator current increases which...

“Equalizer connection is needed in lap winding armature but not in wave winding “ why ?

 The equivalent circuit of a four point – pole dynamo with a simplex winding. The voltage induced in each path is assumed to both to be same and should be if the reluctance of each magnetic path is the same, so that the lines of flux cut by each inductor of each path are the same. However wear of the bearings or deflection of the armature shaft may cause the armature to be closer to some poles and farther from others, thus changing the length of the air gap, and therefore the reluctance of the magnetic circuits of the poles is not identical. This factors cause the voltage in the materials making up the magnetic circuit. These factors cause the voltage in each parallel path differ, and the unequal voltages in turn cause flow of a circulating   current through the windings and brushes , undue heating of the armature and waste the power. To reduce the circulating current, points on the winding which should be at the same potentials are brought to the same potentials by c...

Deriaz Turbine

  Deriaz Turbine which is a reaction turbine. It is also known to as a diagonal turbine. P. Deriaz who is the inventor of Deriaz Turbine. By following his name it’s name is Deriaz   Turbine. This turbine intermediate between the mixed flow and the axial flow turbines, because the flow of water as it passes through the runner is at an angle of 45 °C   to axis. Deriaz   Turbine has some features which is given bellow them: a.        The casing of the turbine is so shaped that there is only small clearance between the blade tips and the casing to reduce leakage loss. b.       Guide vanes are provided ahead of the blades to the regulate and direct flow. c.        It can be employed for heads varying from 30 m to 150 m. d.       The runner has no outer rim connecting all the blades as these blades are movable. e.     ...

What is meant by back e.m.f?

Back e.m.f.: When the motor armature rotates,the conductors also rotate and hence cut the flux.In accordance with the laws of electromagnetic induction, e.m.f.is induced in them whose direction,as found by Fleming , s Right-hand Rule,is in opposition to the applied voltage. Because of its opposite direction, it is referred to as counter e.m.f. or back e.m.f.E b.                                                                                                         ...

Which type of Battery connection Series or Parallel Connection is used for Diesel Generator?

Diesel Generator Battery Connection Batteries can emit explosive gases.     To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To remove the possibility of arching, remove the negative battery cable is first and attach the negative battery last. When using jumper cables to start the engine make sure to connect the cables in parallel Positive to positive and negative to negative. When using external electrical source to start the engine, turn the disconnect switch to the OFF position. Remove the key before attaching the jumper cables. To avoid damage to engine parts do not connect jumper starting or battery charging cable to any fuel system or electronic component. Battery Parallel Connection: The accompanying illustration shows a typical parallel battery connection. This arrangement doubles the cranking amperage. Battery Series Connection: This illustration sh...

3-2-1 Locating Principle. Why generally in base plane three locating pins are used?

  3-2- 1 Method of Location:  3-2- 1 method of location is the fundamental arrangement of locating system. A work piece may be positively and properly located by means of six pins,so positioned that collectively they restrict the work piece in nine of it’s degree of freedom.For this purpose a definite arrangement is used.This   arrangement is called 3-2-1 method of location.   Cause of using three locating pins in base plane : A minimum of three points or pins or locators are generally used in base plane to locate the work piece, although four or more may be used to provide adequate support. It should be noted that a minimum of three pins will always theoritically establish the same location of the work piece. four or more pins(locators)don’t establish this type of theoritical location because if the work piece surface is not geometrically true, the position is still determined by three pins. Three pining system create one surface w...