Advantages of magnetic and vacuum chucks are given bellow: 1. More economical. 2. Reduces the size of the machine table table needed. 3. A given number of parts can be mounted at one time or permits more parts per set up. 4. Smaller diameter cutters may be used since no clearance is required. 5. Able to hold thin and thin walled parts during turning and boring operations without distortion. 6. Ensures safety to the operator. 7. Provides heat free holding. How face plate fixtures are located on the lathe face plate? A lathe faceplate fixture is fastened to a standard lathe faceplate and is usually built up from standard clamping and locating devices.The base of the fixture may be a flat plate bolted to the face plate,as shown in fig.(a),or it may be an angle plate,as shown in fig.(b).It is usually located on the faceplate by means of two dowel pins and secured by cap screws inserted through the faceplate into tapped holes in th...
Help to people supply all information Machine and machine parts such as turbine, boiler , car, engine and so on