How one Remove and Install of Generator Alternator?

How one Remove and Install of Generator Alternator?

How one Remove alternator from Generator?

Removing procedure of Alternator

Before removing Alternator

One must again follow this caution

Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing firstly one should remove negative battery cables and then attach the battery cables last.

Disconnect the ground cable from the battery terminal.

Then remove the drive belt from the alternator pulley.

Remove and tag all wires.

And then follow the following steps

Remove the alternator link capscrew.

Remove the alternator mounting capscrew.

Then remove the alternator.

How one install the Generator Alternator?

Installing procedure of Generator Alternator:

Firstly assemble the alternator, the alternator mounting components must be tightened in the following steps

a.       Alternator to alternator bracket capscrew

b.      Lower brace to alternator capscrew

c.       Lower alternator brace to water pump capscrew

d.      Water inlet to block capscrews

After installation one must check torque value and tight all screw by wrench.